Programming
This section explains the step-by-step process for programming and testing the Tech-Box.io LED Word Clock
Table of Contents - LED Word Clock Instruction Guide
Important Note:
This kit arrives with the Nano Board (Part C) pre-programmed for the "FiveThirty" Clock Face (Part B-1, shown in the image below) and with your shipping address' timezone preconfigured. If you want to display a different time, use the "HalfTo" Clock Face (Part B-2), or customize the color of each letter on the display, you will need to complete this section of the guide. If not, or if you prefer to avoid programming, you can continue on to Section 3 - The Housing by clicking this link Section 3 - The Housing, while being sure to use the "FiveThirty" Clock Face (Part B-1) when assembling the housing. (Note: To update the time that is displayed on the screen or to adjust the time for Daylight Saving Time [DST], you will need to complete this programming process.)
Operating System Selection
The programming process for the LED Word Clock and Nano Board (Part C) is different depending on the operating system that your computer uses. To ensure that you are following the correct process, select your specific operating system by clicking either of the links below (Note: You can return to this page at any time by clicking the "Section 2 - Programming" link at the top of each guide page):
Windows 7 / 10
