Nano Board ATmega 328P / CH340

The TechBox Nano Board is a small, complete, and breadboard-friendly board based on the Atmega328P. The Nano Board arrives pre-soldered and can be powered via the Mini-B USB connection, a 7-12V unregulated external power supply (connected to pin 30 - VIN), or 5V regulated external power supply (pin 27 - 5V). The power source is automatically selected to pull from the highest voltage source. The Nano Board also has a variety of functions for communicating with a PC and other microcontrollers. It is one of the best ways to get started with learning and programming the Arduino programming language. 

Board Features:

Input and Output

Each of the 14 digital pins on the Nano can be used as an input or output, using pinMode(), digitalWrite(), and digitalRead() functions.

Serial

Pin 0 (RX) and Pin 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the CH340G USB chip.

In the Box:

• TechBox Nano Board Microcontroller
  

The Nano Board does not require any soldering and is recommended for beginners ages 12 and up who are looking to get started with Arduino.

Product Dimensions: 1.9"L x 0.4"W x 0.7"D (48x10x18mm)

Product Weight: 0.25 Oz. (7g)