Laser Stem Matrix Instruction Guide

Programming

This section explains the step-by-step process for programming and testing the Tech-Box.io Laser Stem Matrix

 

Tech-Box.io Laser Stem Matrix

Table of Contents - Laser Stem Matrix Instruction Guide

    Section 1 - Getting Started

    Section 2 - The Housing

    Section 3 - Programming

    Section 4 - Coding Challenge

    Important Note:

    This kit comes with the Nano Board (Part C) pre-programmed. If you want to customize the colors or patterns of the display, you will need to complete this section of the guide. If not, or if you prefer to avoid programming and to use the preset configuration, you can continue on with the pre-programmed Nano Board (Part C), in which case your project is now complete! 


    Operating System Selection

    The programming process for the Laser Stem Matrix and Nano Board (Part C) is different depending on the operating system that your computer uses. To ensure that you are following the correct process, select your specific operating system by clicking either of the links below (Note: You can return to this page at any time by clicking the "Section 3 - Programming" link at the top of each guide page):


    Windows Logo

    Windows 7 / 10



    macOS Logo

    Mac OS




     

    <- Section 2: Housing Assembly | Section 4: Coding Challenge ->



    Struggle Less. Build More.

    Tech-Box.io



    Back to blog